The Lincoln Electric AC-225 (K1170) is a tough, simple AC stick welder with a 40 to 225 amp output range and a smooth AC arc. It is still a good buy for farm and shop repair if you have a 230V circuit and do not need DC, but it is heavy, uses a lot of input power and cannot run DC-only rods.
We reviewed it using Lincoln Electric’s published specifications and spec sheet, retailer listings and general stick welding knowledge. Lincoln sells the machine through dealers rather than Amazon, so we list Amazon alternatives at the end.
We research every product using manufacturer specifications, published manuals and owner feedback. As an Amazon Associate, GenuineWelding earns from qualifying purchases at no extra cost to you. Prices change often, so check the current price before you buy.
Key Specs
| Spec | Detail |
|---|---|
| Process | Stick (SMAW) |
| Polarity | AC |
| Input power | 230V, single phase, 60 Hz |
| Input current at rated output | 50 A |
| Rated output | 225 A at 25 V, 20% duty cycle |
| Output range | 40-225 A |
| Max open-circuit voltage | 79 V |
| Dimensions | 24 x 17.25 x 12 in |
| Weight | About 96-109 lb depending on source |
| Included | Electrode holder and cable, work clamp and cable, input cable with NEMA 6-50P plug |
What the AC-225 Is
Lincoln calls the AC225 “the time-tested original” compact stick welder. It is an AC transformer machine with a full range 40 to 225 amp selector switch that sets the welding current and gives a uniform arc. Lincoln says it produces an extremely smooth AC arc for carbon, low alloy and stainless steels and cast iron, and that metals 16 gauge and heavier can be arc welded with it. It ships with an insulated electrode holder, a heavy-duty work clamp and an input cable with a plug.

Performance and Rods
With 225 amps available, the AC-225 can run 3/16 inch general-purpose mild steel electrodes and 5/32 inch sizes of other electrodes. Because it only puts out AC, you need AC-capable rods. E6011 and E6013 run on AC, and E7018 AC or low-hydrogen rods designed for AC also work, while E6010 requires DC and will not run. See our guides to the best welding rods for rusty metal and welding rods for beginners for AC-friendly picks, and our article on whether stick welding is AC or DC.
Power Requirements
The AC-225 needs 230V single-phase power and draws 50 amps at rated output. The cord ends in a NEMA 6-50P plug, so you need a matching 6-50 receptacle on a suitably rated circuit. Have an electrician confirm your wiring and breaker size before you plug it in. If you do not have 230V, look at a 120V/230V inverter such as those in our stick welder guide.
Weight, Duty Cycle and Limits
The rated duty cycle is 20 percent at 225 amps, meaning you can weld for about two minutes out of every ten at full output. Most real-world stick welding is done at lower amps, where the duty cycle is higher. The weight is around 100 pounds depending on whether you read Lincoln’s web page or its spec sheet, so you will probably keep it in one place or on a cart. It cannot do DC, TIG or MIG.
Where to Buy
Lincoln sells the AC-225 mainly through welding supply dealers and home-improvement retailers, and prices vary a lot by dealer and date, so compare several sellers and check the current price before you buy. Lincoln also lists a 3-year warranty on the machine through at least one distributor listing.
AC-225 vs Modern Inverter Stick Welders
The biggest question with the AC-225 is whether to buy a classic transformer or a modern inverter. Based on Lincoln’s specs and the Amazon listings for the alternatives:
| Welder | Output | Input | Weight | Processes |
|---|---|---|---|---|
| Lincoln AC-225 (tombstone) | 40-225 A AC | 230V only | About 96-109 lb | AC stick |
| Lincoln Weld-Pak 225i | 10-225 A DC | 120V or 230V | 20 lb | DC stick, touch-start TIG (accessories extra) |
| Forney Easy Weld 160 ST-i | Up to 160 A DC | 120V or 230V | 15 lb | DC stick and DC TIG |
| Miller Thunderbolt 210 MV | 10-210 A DC (110 A on 120V) | 120V or 240V | 13 lb | DC stick |
The inverters are a fraction of the weight, run on 120V or 230V and give DC output, which lets them run DC-only rods such as 6010 and makes 7018 smoother. The AC-225 wins on simplicity and durability, which is why so many are still working on farms decades after they were built.
Rods That Work Best on the AC-225
- E6011: the go-to AC rod for dirty, rusty farm repairs, with deep penetration.
- E6013: easy to strike and run on AC for light fabrication and thin steel.
- E7014: fast fill and easy slag, a good choice on AC for flat and horizontal work.
- E7018 AC versions: some 7018 rods are made for AC. Check the box before buying.
- Avoid E6010: it needs DC electrode positive and will not run properly on an AC-only machine.
See is stick welding AC or DC and 7014 vs 7018 for more on rod choice.
Installation Tips
The AC-225 needs a dedicated 230V circuit with a NEMA 6-50 receptacle. Lincoln lists an input current of 50 A at rated output, so have a licensed electrician confirm that your breaker and wiring are sized correctly. Mount the receptacle where the heavy machine can sit close by, because long or light-gauge extension cords cause voltage drop and overheating.
Pros and Cons
Pros
- Smooth AC arc
- Very simple and durable
- Includes holder, work clamp and plug
- Well supported by Lincoln
Cons
- Heavy at about 100 lb
- AC only, so some DC-only rods will not run
- Needs a 230V outlet
- Large input current of 50 A
Who Should Buy It
farm, ranch and home shops with a 230V circuit that want a simple, rugged stick welder.
Alternatives to Consider
- Light inverter stick welder: Lincoln Weld-Pak 225i (120V/230V, 20 lb).
- Budget inverter: Forney Easy Weld 160 ST-i.
- Miller option for the farm: Miller Thunderbolt 210 MV (see our best welder for farm use guide).
Products Mentioned in This Article
FAQs
What is a tombstone welder?
A tombstone welder is a nickname for the classic AC transformer stick welder with a tall rectangular cabinet, such as the Lincoln AC-225.
Can the Lincoln AC-225 weld with 6010 rods?
No. E6010 requires DC, and the AC-225 only produces AC. Use E6011, E6013 or other AC-capable rods.
What voltage does the AC-225 need?
230V single-phase, with a 50 A input current at rated output and a NEMA 6-50P plug on the cord.
How much does the Lincoln AC-225 weigh?
Lincoln lists about 96 pounds on its website and 109 pounds on the spec sheet, so plan for roughly 100 pounds.
Is the AC-225 good for beginners?
It is simple and forgiving, though AC arcs are slightly harder to start than DC. A DC inverter is often easier to learn on.
Can the Lincoln AC-225 run 7018?
Yes, with 7018 rods designed for AC. Standard 7018 runs best on DC electrode positive, so check the rod box for AC compatibility.
Final Verdict
The Lincoln AC-225 is an old-school workhorse that still makes sense for farm and shop repair when you have 230V power and want a simple machine that will last. If you want something light or need DC, buy an inverter instead.


